Author: Jason Brownlee

Real-world time series forecasting is challenging for a whole host of reasons not limited to problem features such as having multiple input variables, the requirement to predict multiple time steps, and the need to perform the same type of prediction for multiple physical sites.

The EMC Data Science Global Hackathon dataset, or the ‘Air Quality Prediction’ dataset for short, describes weather conditions at multiple sites and requires a prediction of air quality measurements over the subsequent three days.

Before diving into sophisticated machine learning and deep learning methods for time series forecasting, it is important to find the limits of classical methods, such as developing autoregressive models using the AR or ARIMA method.

In this tutorial, you will discover how to develop autoregressive models for multi-step time series forecasting for a multivariate air pollution time series.

After completing this tutorial, you will know:

- How to analyze and impute missing values for time series data.
- How to develop and evaluate an autoregressive model for multi-step time series forecasting.
- How to improve an autoregressive model using alternate data imputation methods.

Let’s get started.

## Tutorial Overview

This tutorial is divided into six parts; they are:

- Problem Description
- Model Evaluation
- Data Analysis
- Develop an Autoregressive Model
- Autoregressive Model with Global Impute Strategy

## Problem Description

The Air Quality Prediction dataset describes weather conditions at multiple sites and requires a prediction of air quality measurements over the subsequent three days.

Specifically, weather observations such as temperature, pressure, wind speed, and wind direction are provided hourly for eight days for multiple sites. The objective is to predict air quality measurements for the next 3 days at multiple sites. The forecast lead times are not contiguous; instead, specific lead times must be forecast over the 72 hour forecast period. They are:

+1, +2, +3, +4, +5, +10, +17, +24, +48, +72

Further, the dataset is divided into disjoint but contiguous chunks of data, with eight days of data followed by three days that require a forecast.

Not all observations are available at all sites or chunks and not all output variables are available at all sites and chunks. There are large portions of missing data that must be addressed.

The dataset was used as the basis for a short duration machine learning competition (or hackathon) on the Kaggle website in 2012.

Submissions for the competition were evaluated against the true observations that were withheld from participants and scored using Mean Absolute Error (MAE). Submissions required the value of -1,000,000 to be specified in those cases where a forecast was not possible due to missing data. In fact, a template of where to insert missing values was provided and required to be adopted for all submissions (what a pain).

A winning entrant achieved a MAE of 0.21058 on the withheld test set (private leaderboard) using random forest on lagged observations. A writeup of this solution is available in the post:

- Chucking everything into a Random Forest: Ben Hamner on Winning The Air Quality Prediction Hackathon, 2012.

In this tutorial, we will explore how to develop naive forecasts for the problem that can be used as a baseline to determine whether a model has skill on the problem or not.

### Need help with Deep Learning for Time Series?

Take my free 7-day email crash course now (with sample code).

Click to sign-up and also get a free PDF Ebook version of the course.

## Model Evaluation

Before we can evaluate naive forecasting methods, we must develop a test harness.

This includes at least how the data will be prepared and how forecasts will be evaluated.

### Load Dataset

The first step is to download the dataset and load it into memory.

The dataset can be downloaded for free from the Kaggle website. You may have to create an account and log in, in order to be able to download the dataset.

Download the entire dataset, e.g. “*Download All*” to your workstation and unzip the archive in your current working directory with the folder named ‘*AirQualityPrediction*‘.

Our focus will be the ‘*TrainingData.csv*‘ file that contains the training dataset, specifically data in chunks where each chunk is eight contiguous days of observations and target variables.

We can load the data file into memory using the Pandas read_csv() function and specify the header row on line 0.

# load dataset dataset = read_csv('AirQualityPrediction/TrainingData.csv', header=0)

We can group data by the ‘chunkID’ variable (column index 1).

First, let’s get a list of the unique chunk identifiers.

chunk_ids = unique(values[:, 1])

We can then collect all rows for each chunk identifier and store them in a dictionary for easy access.

chunks = dict() # sort rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks[chunk_id] = values[selection, :]

Below defines a function named *to_chunks()* that takes a NumPy array of the loaded data and returns a dictionary of *chunk_id* to rows for the chunk.

# split the dataset by 'chunkID', return a dict of id to rows def to_chunks(values, chunk_ix=1): chunks = dict() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks[chunk_id] = values[selection, :] return chunks

The complete example that loads the dataset and splits it into chunks is listed below.

# load data and split into chunks from numpy import unique from pandas import read_csv # split the dataset by 'chunkID', return a dict of id to rows def to_chunks(values, chunk_ix=1): chunks = dict() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks[chunk_id] = values[selection, :] return chunks # load dataset dataset = read_csv('AirQualityPrediction/TrainingData.csv', header=0) # group data by chunks values = dataset.values chunks = to_chunks(values) print('Total Chunks: %d' % len(chunks))

Running the example prints the number of chunks in the dataset.

Total Chunks: 208

### Data Preparation

Now that we know how to load the data and split it into chunks, we can separate into train and test datasets.

Each chunk covers an interval of eight days of hourly observations, although the number of actual observations within each chunk may vary widely.

We can split each chunk into the first five days of observations for training and the last three for test.

Each observation has a row called ‘*position_within_chunk*‘ that varies from 1 to 192 (8 days * 24 hours). We can therefore take all rows with a value in this column that is less than or equal to 120 (5 * 24) as training data and any values more than 120 as test data.

Further, any chunks that don’t have any observations in the train or test split can be dropped as not viable.

When working with the naive models, we are only interested in the target variables, and none of the input meteorological variables. Therefore, we can remove the input data and have the train and test data only comprised of the 39 target variables for each chunk, as well as the position within chunk and hour of observation.

The *split_train_test()* function below implements this behavior; given a dictionary of chunks, it will split each into a list of train and test chunk data.

# split each chunk into train/test sets def split_train_test(chunks, row_in_chunk_ix=2): train, test = list(), list() # first 5 days of hourly observations for train cut_point = 5 * 24 # enumerate chunks for k,rows in chunks.items(): # split chunk rows by 'position_within_chunk' train_rows = rows[rows[:,row_in_chunk_ix] <= cut_point, :] test_rows = rows[rows[:,row_in_chunk_ix] > cut_point, :] if len(train_rows) == 0 or len(test_rows) == 0: print('>dropping chunk=%d: train=%s, test=%s' % (k, train_rows.shape, test_rows.shape)) continue # store with chunk id, position in chunk, hour and all targets indices = [1,2,5] + [x for x in range(56,train_rows.shape[1])] train.append(train_rows[:, indices]) test.append(test_rows[:, indices]) return train, test

We do not require the entire test dataset; instead, we only require the observations at specific lead times over the three day period, specifically the lead times:

+1, +2, +3, +4, +5, +10, +17, +24, +48, +72

Where, each lead time is relative to the end of the training period.

First, we can put these lead times into a function for easy reference:

# return a list of relative forecast lead times def get_lead_times(): return [1, 2 ,3, 4, 5, 10, 17, 24, 48, 72]

Next, we can reduce the test dataset down to just the data at the preferred lead times.

We can do that by looking at the ‘*position_within_chunk*‘ column and using the lead time as an offset from the end of the training dataset, e.g. 120 + 1, 120 +2, etc.

If we find a matching row in the test set, it is saved, otherwise a row of NaN observations is generated.

The function *to_forecasts()* below implements this and returns a NumPy array with one row for each forecast lead time for each chunk.

# convert the rows in a test chunk to forecasts def to_forecasts(test_chunks, row_in_chunk_ix=1): # get lead times lead_times = get_lead_times() # first 5 days of hourly observations for train cut_point = 5 * 24 forecasts = list() # enumerate each chunk for rows in test_chunks: chunk_id = rows[0, 0] # enumerate each lead time for tau in lead_times: # determine the row in chunk we want for the lead time offset = cut_point + tau # retrieve data for the lead time using row number in chunk row_for_tau = rows[rows[:,row_in_chunk_ix]==offset, :] # check if we have data if len(row_for_tau) == 0: # create a mock row [chunk, position, hour] + [nan...] row = [chunk_id, offset, nan] + [nan for _ in range(39)] forecasts.append(row) else: # store the forecast row forecasts.append(row_for_tau[0]) return array(forecasts)

We can tie all of this together and split the dataset into train and test sets and save the results to new files.

The complete code example is listed below.

# split data into train and test sets from numpy import unique from numpy import nan from numpy import array from numpy import savetxt from pandas import read_csv # split the dataset by 'chunkID', return a dict of id to rows def to_chunks(values, chunk_ix=1): chunks = dict() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks[chunk_id] = values[selection, :] return chunks # split each chunk into train/test sets def split_train_test(chunks, row_in_chunk_ix=2): train, test = list(), list() # first 5 days of hourly observations for train cut_point = 5 * 24 # enumerate chunks for k,rows in chunks.items(): # split chunk rows by 'position_within_chunk' train_rows = rows[rows[:,row_in_chunk_ix] <= cut_point, :] test_rows = rows[rows[:,row_in_chunk_ix] > cut_point, :] if len(train_rows) == 0 or len(test_rows) == 0: print('>dropping chunk=%d: train=%s, test=%s' % (k, train_rows.shape, test_rows.shape)) continue # store with chunk id, position in chunk, hour and all targets indices = [1,2,5] + [x for x in range(56,train_rows.shape[1])] train.append(train_rows[:, indices]) test.append(test_rows[:, indices]) return train, test # return a list of relative forecast lead times def get_lead_times(): return [1, 2 ,3, 4, 5, 10, 17, 24, 48, 72] # convert the rows in a test chunk to forecasts def to_forecasts(test_chunks, row_in_chunk_ix=1): # get lead times lead_times = get_lead_times() # first 5 days of hourly observations for train cut_point = 5 * 24 forecasts = list() # enumerate each chunk for rows in test_chunks: chunk_id = rows[0, 0] # enumerate each lead time for tau in lead_times: # determine the row in chunk we want for the lead time offset = cut_point + tau # retrieve data for the lead time using row number in chunk row_for_tau = rows[rows[:,row_in_chunk_ix]==offset, :] # check if we have data if len(row_for_tau) == 0: # create a mock row [chunk, position, hour] + [nan...] row = [chunk_id, offset, nan] + [nan for _ in range(39)] forecasts.append(row) else: # store the forecast row forecasts.append(row_for_tau[0]) return array(forecasts) # load dataset dataset = read_csv('AirQualityPrediction/TrainingData.csv', header=0) # group data by chunks values = dataset.values chunks = to_chunks(values) # split into train/test train, test = split_train_test(chunks) # flatten training chunks to rows train_rows = array([row for rows in train for row in rows]) # print(train_rows.shape) print('Train Rows: %s' % str(train_rows.shape)) # reduce train to forecast lead times only test_rows = to_forecasts(test) print('Test Rows: %s' % str(test_rows.shape)) # save datasets savetxt('AirQualityPrediction/naive_train.csv', train_rows, delimiter=',') savetxt('AirQualityPrediction/naive_test.csv', test_rows, delimiter=',')

Running the example first comments that chunk 69 is removed from the dataset for having insufficient data.

We can then see that we have 42 columns in each of the train and test sets, one for the chunk id, position within chunk, hour of day, and the 39 training variables.

We can also see the dramatically smaller version of the test dataset with rows only at the forecast lead times.

The new train and test datasets are saved in the ‘*naive_train.csv*‘ and ‘*naive_test.csv*‘ files respectively.

>dropping chunk=69: train=(0, 95), test=(28, 95) Train Rows: (23514, 42) Test Rows: (2070, 42)

### Forecast Evaluation

Once forecasts have been made, they need to be evaluated.

It is helpful to have a simpler format when evaluating forecasts. For example, we will use the three-dimensional structure of *[chunks][variables][time]*, where variable is the target variable number from 0 to 38 and time is the lead time index from 0 to 9.

Models are expected to make predictions in this format.

We can also restructure the test dataset to have this dataset for comparison. The *prepare_test_forecasts()* function below implements this.

# convert the test dataset in chunks to [chunk][variable][time] format def prepare_test_forecasts(test_chunks): predictions = list() # enumerate chunks to forecast for rows in test_chunks: # enumerate targets for chunk chunk_predictions = list() for j in range(3, rows.shape[1]): yhat = rows[:, j] chunk_predictions.append(yhat) chunk_predictions = array(chunk_predictions) predictions.append(chunk_predictions) return array(predictions)

We will evaluate a model using the mean absolute error, or MAE. This is the metric that was used in the competition and is a sensible choice given the non-Gaussian distribution of the target variables.

If a lead time contains no data in the test set (e.g. *NaN*), then no error will be calculated for that forecast. If the lead time does have data in the test set but no data in the forecast, then the full magnitude of the observation will be taken as error. Finally, if the test set has an observation and a forecast was made, then the absolute difference will be recorded as the error.

The *calculate_error()* function implements these rules and returns the error for a given forecast.

# calculate the error between an actual and predicted value def calculate_error(actual, predicted): # give the full actual value if predicted is nan if isnan(predicted): return abs(actual) # calculate abs difference return abs(actual - predicted)

Errors are summed across all chunks and all lead times, then averaged.

The overall MAE will be calculated, but we will also calculate a MAE for each forecast lead time. This can help with model selection generally as some models may perform differently at different lead times.

The evaluate_forecasts() function below implements this, calculating the MAE and per-lead time MAE for the provided predictions and expected values in *[chunk][variable][time]* format.

# evaluate a forecast in the format [chunk][variable][time] def evaluate_forecasts(predictions, testset): lead_times = get_lead_times() total_mae, times_mae = 0.0, [0.0 for _ in range(len(lead_times))] total_c, times_c = 0, [0 for _ in range(len(lead_times))] # enumerate test chunks for i in range(len(test_chunks)): # convert to forecasts actual = testset[i] predicted = predictions[i] # enumerate target variables for j in range(predicted.shape[0]): # enumerate lead times for k in range(len(lead_times)): # skip if actual in nan if isnan(actual[j, k]): continue # calculate error error = calculate_error(actual[j, k], predicted[j, k]) # update statistics total_mae += error times_mae[k] += error total_c += 1 times_c[k] += 1 # normalize summed absolute errors total_mae /= total_c times_mae = [times_mae[i]/times_c[i] for i in range(len(times_mae))] return total_mae, times_mae

Once we have the evaluation of a model, we can present it.

The *summarize_error()* function below first prints a one-line summary of a model’s performance then creates a plot of MAE per forecast lead time.

# summarize scores def summarize_error(name, total_mae, times_mae): # print summary lead_times = get_lead_times() formatted = ['+%d %.3f' % (lead_times[i], times_mae[i]) for i in range(len(lead_times))] s_scores = ', '.join(formatted) print('%s: [%.3f MAE] %s' % (name, total_mae, s_scores)) # plot summary pyplot.plot([str(x) for x in lead_times], times_mae, marker='.') pyplot.show()

We are now ready to start exploring the performance of naive forecasting methods.

## Data Analysis

The first step in fitting classical time series models to this data is to take a closer look at the data.

There are 208 (actually 207) usable chunks of data, and each chunk has 39 time series to fit; that is a total of 8,073 separate models that would need to be fit on the data. That is a lot of models, but the models are trained on a relatively small amount of data, at most (5 * 24) or 120 observations and the model is linear so it will find a fit quickly.

We have choices about how to configure models to the data; for example:

- One model configuration for all time series (simplest).
- One model configuration for all variables across chunks (reasonable).
- One model configuration per variable per chunk (most complex).

We will investigate the simplest approach of one model configuration for all series, but you may want to explore one or more of the other approaches.

This section is divided into three parts; they are:

- Missing Data
- Impute Missing Data
- Autocorrelation Plots

### Missing Data

Classical time series methods require that the time series to be complete, e.g. that there are no missing values.

Therefore the first step is to investigate how complete or incomplete the target variables are.

For a given variable, there may be missing observations defined by missing rows. Specifically, each observation has a ‘*position_within_chunk*‘. We expect each chunk in the training dataset to have 120 observations, with ‘*positions_within_chunk*‘ from 1 to 120 inclusively.

Therefore, we can create an array of 120 nan values for each variable, mark all observations in the chunk using the ‘*positions_within_chunk*‘ values, and anything left will be marked *NaN*. We can then plot each variable and look for gaps.

The *variable_to_series()* function below will take the rows for a chunk and a given column index for the target variable and will return a series of 120 time steps for the variable with all available data marked with the value from the chunk.

# layout a variable with breaks in the data for missing positions def variable_to_series(chunk_train, col_ix, n_steps=5*24): # lay out whole series data = [nan for _ in range(n_steps)] # mark all available data for i in range(len(chunk_train)): # get position in chunk position = int(chunk_train[i, 1] - 1) # store data data[position] = chunk_train[i, col_ix] return data

We can then call this function for each target variable in one chunk and create a line plot.

The function below named *plot_variables()* will implement this and create a figure with 39 line plots stacked horizontally.

# plot variables horizontally with gaps for missing data def plot_variables(chunk_train, n_vars=39): pyplot.figure() for i in range(n_vars): # convert target number into column number col_ix = 3 + i # mark missing obs for variable series = variable_to_series(chunk_train, col_ix) # plot ax = pyplot.subplot(n_vars, 1, i+1) ax.set_xticklabels([]) ax.set_yticklabels([]) pyplot.plot(series) # show plot pyplot.show()

Tying this together, the complete example is listed below. A plot of all variables in the first chunk is created.

# plot missing from numpy import loadtxt from numpy import nan from numpy import unique from matplotlib import pyplot # split the dataset by 'chunkID', return a list of chunks def to_chunks(values, chunk_ix=0): chunks = list() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks.append(values[selection, :]) return chunks # layout a variable with breaks in the data for missing positions def variable_to_series(chunk_train, col_ix, n_steps=5*24): # lay out whole series data = [nan for _ in range(n_steps)] # mark all available data for i in range(len(chunk_train)): # get position in chunk position = int(chunk_train[i, 1] - 1) # store data data[position] = chunk_train[i, col_ix] return data # plot variables horizontally with gaps for missing data def plot_variables(chunk_train, n_vars=39): pyplot.figure() for i in range(n_vars): # convert target number into column number col_ix = 3 + i # mark missing obs for variable series = variable_to_series(chunk_train, col_ix) # plot ax = pyplot.subplot(n_vars, 1, i+1) ax.set_xticklabels([]) ax.set_yticklabels([]) pyplot.plot(series) # show plot pyplot.show() # load dataset train = loadtxt('AirQualityPrediction/naive_train.csv', delimiter=',') # group data by chunks train_chunks = to_chunks(train) # pick one chunk rows = train_chunks[0] # plot variables plot_variables(rows)

Running the example creates a figure with 39 line plots, one for each target variable in the first chunk.

We can see a seasonal structure in many of the variables. This suggests it may be beneficial to perform a 24-hour seasonal differencing of each series prior to modeling.

The plots are small, and you may need to increase the size of the figure to clearly see the data.

We can see that there are variables for which we have no data. These can be detected and ignored as we cannot model or forecast them.

We can see gaps in many of the series, but the gaps are short, lasting for a few hours at most. These could be imputed either with persistence of previous values or values at the same hours within the same series.

Looking at a few other chunks randomly, many result in plots with much the same observations.

This is not always the case though.

Update the example to plot the 4th chunk in the dataset (index 3).

# pick one chunk rows = train_chunks[3]

The result is a figure that tells a very different story.

We see gaps in the data that last for many hours, perhaps up to a day or more.

These series will require dramatic repair before they can be used to fit a classical model.

Imputing the missing data using persistence or observations within the series with the same hour will likely not be sufficient. They may have to be filled with average values taken across the entire training dataset.

### Impute Missing Data

There are many ways to impute the missing data, and we cannot know which is best a priori.

One approach would be to prepare the data using multiple different imputation methods and use the skill of the models fit on the data to help guide the best approach.

Some imputation approaches already suggested include:

- Persist the last observation in the series, also called linear interpolation.
- Fill with values or average values within the series with the same hour of day.
- Fill with values or average values with the same hour of day across the training dataset.

It may also be useful to use combinations, e.g. persist or fill from the series for small gaps and draw from the whole dataset for large gaps.

We can also investigate the effect of imputing methods by filling in the missing data and looking at plots to see if the series looks reasonable. It’s crude, effective, and fast.

First, we need to calculate a parallel series of the hour of day for each chunk that we can use for imputing hour-specific data for each variable in the chunk.

Given a series of partially filled hours of day, the *interpolate_hours()* function below will fill in the missing hours of day. It does this by finding the first marked hour, then counting forward, filling in the hour of day, then performing the same operation backwards.

# interpolate series of hours (in place) in 24 hour time def interpolate_hours(hours): # find the first hour ix = -1 for i in range(len(hours)): if not isnan(hours[i]): ix = i break # fill-forward hour = hours[ix] for i in range(ix+1, len(hours)): # increment hour hour += 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # fill-backward hour = hours[ix] for i in range(ix-1, -1, -1): # decrement hour hour -= 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24

I’m sure there is a more Pythonic way to write this function, but I wanted to lay it all out to make it obvious what was going on.

We can test this out on a mock list of hours with missing data. The complete example is listed below.

# interpolate hours from numpy import nan from numpy import isnan # interpolate series of hours (in place) in 24 hour time def interpolate_hours(hours): # find the first hour ix = -1 for i in range(len(hours)): if not isnan(hours[i]): ix = i break # fill-forward hour = hours[ix] for i in range(ix+1, len(hours)): # increment hour hour += 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # fill-backward hour = hours[ix] for i in range(ix-1, -1, -1): # decrement hour hour -= 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # define hours with missing data data = [nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, 0, nan, 2, nan, nan, nan, nan, nan, nan, 9, 10, 11, 12, 13, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan] print(data) # fill in missing hours interpolate_hours(data) print(data)

Running the example first prints the hour data with missing values, then the same sequence with all of the hours filled in correctly.

[nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, 0, nan, 2, nan, nan, nan, nan, nan, nan, 9, 10, 11, 12, 13, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan, nan] [11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 0, 1]

We can use this function to prepare a series of hours for a chunk that can be used to fill in missing values for a chunk using hour-specific information.

We can call the same *variable_to_series()* function from the previous section to create the series of hours with missing values (column index 2), then call *interpolate_hours()* to fill in the gaps.

# prepare sequence of hours for the chunk hours = variable_to_series(rows, 2) # interpolate hours interpolate_hours(hours)

We can then pass the hours to any impute function that may make use of it.

Let’s try filling in missing values in a chunk with values within the same series with the same hour. Specifically, we will find all rows with the same hour on the series and calculate the median value.

The *impute_missing()* below takes all of the rows in a chunk, the prepared sequence of hours of the day for the chunk, and the series with missing values for a variable and the column index for a variable.

It first checks to see if the series is all missing data and returns immediately if this is the case as no impute can be performed. It then enumerates over the time steps of the series and when it detects a time step with no data, it collects all rows in the series with data for the same hour and calculates the median value.

# impute missing data def impute_missing(rows, hours, series, col_ix): # count missing observations n_missing = count_nonzero(isnan(series)) # calculate ratio of missing ratio = n_missing / float(len(series)) * 100 # check for no data if ratio == 100.0: return series # impute missing using the median value for hour in the series imputed = list() for i in range(len(series)): if isnan(series[i]): # get all rows with the same hour matches = rows[rows[:,2]==hours[i]] # fill with median value value = nanmedian(matches[:, col_ix]) imputed.append(value) else: imputed.append(series[i]) return imputed

To see the impact of this impute strategy, we can update the *plot_variables()* function from the previous section to first plot the imputed series then plot the original series with missing values.

This will allow the imputed values to shine through in the gaps of the original series and we can see if the results look reasonable.

The updated version of the *plot_variables()* function is listed below with this change, calling the *impute_missing()* function to create the imputed version of the series and taking the hours series as an argument.

# plot variables horizontally with gaps for missing data def plot_variables(chunk_train, hours, n_vars=39): pyplot.figure() for i in range(n_vars): # convert target number into column number col_ix = 3 + i # mark missing obs for variable series = variable_to_series(chunk_train, col_ix) ax = pyplot.subplot(n_vars, 1, i+1) ax.set_xticklabels([]) ax.set_yticklabels([]) # imputed imputed = impute_missing(chunk_train, hours, series, col_ix) # plot imputed pyplot.plot(imputed) # plot with missing pyplot.plot(series) # show plot pyplot.show()

Tying all of this together, the complete example is listed below.

# impute missing from numpy import loadtxt from numpy import nan from numpy import isnan from numpy import count_nonzero from numpy import unique from numpy import nanmedian from matplotlib import pyplot # split the dataset by 'chunkID', return a list of chunks def to_chunks(values, chunk_ix=0): chunks = list() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks.append(values[selection, :]) return chunks # impute missing data def impute_missing(rows, hours, series, col_ix): # count missing observations n_missing = count_nonzero(isnan(series)) # calculate ratio of missing ratio = n_missing / float(len(series)) * 100 # check for no data if ratio == 100.0: return series # impute missing using the median value for hour in the series imputed = list() for i in range(len(series)): if isnan(series[i]): # get all rows with the same hour matches = rows[rows[:,2]==hours[i]] # fill with median value value = nanmedian(matches[:, col_ix]) imputed.append(value) else: imputed.append(series[i]) return imputed # interpolate series of hours (in place) in 24 hour time def interpolate_hours(hours): # find the first hour ix = -1 for i in range(len(hours)): if not isnan(hours[i]): ix = i break # fill-forward hour = hours[ix] for i in range(ix+1, len(hours)): # increment hour hour += 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # fill-backward hour = hours[ix] for i in range(ix-1, -1, -1): # decrement hour hour -= 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # layout a variable with breaks in the data for missing positions def variable_to_series(chunk_train, col_ix, n_steps=5*24): # lay out whole series data = [nan for _ in range(n_steps)] # mark all available data for i in range(len(chunk_train)): # get position in chunk position = int(chunk_train[i, 1] - 1) # store data data[position] = chunk_train[i, col_ix] return data # plot variables horizontally with gaps for missing data def plot_variables(chunk_train, hours, n_vars=39): pyplot.figure() for i in range(n_vars): # convert target number into column number col_ix = 3 + i # mark missing obs for variable series = variable_to_series(chunk_train, col_ix) ax = pyplot.subplot(n_vars, 1, i+1) ax.set_xticklabels([]) ax.set_yticklabels([]) # imputed imputed = impute_missing(chunk_train, hours, series, col_ix) # plot imputed pyplot.plot(imputed) # plot with missing pyplot.plot(series) # show plot pyplot.show() # load dataset train = loadtxt('AirQualityPrediction/naive_train.csv', delimiter=',') # group data by chunks train_chunks = to_chunks(train) # pick one chunk rows = train_chunks[0] # prepare sequence of hours for the chunk hours = variable_to_series(rows, 2) # interpolate hours interpolate_hours(hours) # plot variables plot_variables(rows, hours)

Running the example creates a single figure with 39 line plots: one for each target variable in the first chunk in the training dataset.

We can see that the series is orange, showing the original data and the gaps have been imputed and are marked in blue.

The blue segments seem reasonable.

We can try the same approach on the 4th chunk in the dataset that has a lot more missing data.

# pick one chunk rows = train_chunks[0]

Running the example creates the same kind of figure, but here we can see the large missing segments filled in with imputed values.

Again, the sequences seem reasonable, even showing daily seasonal cycle structure where appropriate.

This looks like a good start; you can explore other imputation strategies and see how they compare either in terms of line plots or on the resulting model skill.

### Autocorrelation Plots

Now that we know how to fill in the missing values, we can take a look at autocorrelation plots for the series data.

Autocorrelation plots summarize the relationship of each observation with observations at prior time steps. Together with partial autocorrelation plots, they can be used to determine the configuration for an ARMA model.

The statsmodels library provides the plot_acf() and plot_pacf() functions that can be used to plot ACF and PACF plots respectively.

We can update the *plot_variables()* to create these plots, one of each type for each of the 39 series. That is a lot of plots.

We will stack all ACF plots on the left vertically and all PACF plots on the right vertically. That is two columns of 39 plots. We will limit the lags considered by the plot to 24 time steps (hours) and ignore the correlation of each variable with itself as it is redundant.

The updated *plot_variables()* function for plotting ACF and PACF plots is listed below.

# plot acf and pacf plots for each imputed variable series def plot_variables(chunk_train, hours, n_vars=39): pyplot.figure() n_plots = n_vars * 2 j = 0 lags = 24 for i in range(1, n_plots, 2): # convert target number into column number col_ix = 3 + j j += 1 # get series series = variable_to_series(chunk_train, col_ix) imputed = impute_missing(chunk_train, hours, series, col_ix) # acf axis = pyplot.subplot(n_vars, 2, i) plot_acf(imputed, ax=axis, lags=lags, zero=False) axis.set_title('') axis.set_xticklabels([]) axis.set_yticklabels([]) # pacf axis = pyplot.subplot(n_vars, 2, i+1) plot_pacf(imputed, ax=axis, lags=lags, zero=False) axis.set_title('') axis.set_xticklabels([]) axis.set_yticklabels([]) # show plot pyplot.show()

The complete example is listed below.

# acf and pacf plots from numpy import loadtxt from numpy import nan from numpy import isnan from numpy import count_nonzero from numpy import unique from numpy import nanmedian from matplotlib import pyplot from statsmodels.graphics.tsaplots import plot_acf from statsmodels.graphics.tsaplots import plot_pacf # split the dataset by 'chunkID', return a list of chunks def to_chunks(values, chunk_ix=0): chunks = list() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks.append(values[selection, :]) return chunks # impute missing data def impute_missing(rows, hours, series, col_ix): # count missing observations n_missing = count_nonzero(isnan(series)) # calculate ratio of missing ratio = n_missing / float(len(series)) * 100 # check for no data if ratio == 100.0: return series # impute missing using the median value for hour in the series imputed = list() for i in range(len(series)): if isnan(series[i]): # get all rows with the same hour matches = rows[rows[:,2]==hours[i]] # fill with median value value = nanmedian(matches[:, col_ix]) imputed.append(value) else: imputed.append(series[i]) return imputed # interpolate series of hours (in place) in 24 hour time def interpolate_hours(hours): # find the first hour ix = -1 for i in range(len(hours)): if not isnan(hours[i]): ix = i break # fill-forward hour = hours[ix] for i in range(ix+1, len(hours)): # increment hour hour += 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # fill-backward hour = hours[ix] for i in range(ix-1, -1, -1): # decrement hour hour -= 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # layout a variable with breaks in the data for missing positions def variable_to_series(chunk_train, col_ix, n_steps=5*24): # lay out whole series data = [nan for _ in range(n_steps)] # mark all available data for i in range(len(chunk_train)): # get position in chunk position = int(chunk_train[i, 1] - 1) # store data data[position] = chunk_train[i, col_ix] return data # plot acf and pacf plots for each imputed variable series def plot_variables(chunk_train, hours, n_vars=39): pyplot.figure() n_plots = n_vars * 2 j = 0 lags = 24 for i in range(1, n_plots, 2): # convert target number into column number col_ix = 3 + j j += 1 # get series series = variable_to_series(chunk_train, col_ix) imputed = impute_missing(chunk_train, hours, series, col_ix) # acf axis = pyplot.subplot(n_vars, 2, i) plot_acf(imputed, ax=axis, lags=lags, zero=False) axis.set_title('') axis.set_xticklabels([]) axis.set_yticklabels([]) # pacf axis = pyplot.subplot(n_vars, 2, i+1) plot_pacf(imputed, ax=axis, lags=lags, zero=False) axis.set_title('') axis.set_xticklabels([]) axis.set_yticklabels([]) # show plot pyplot.show() # load dataset train = loadtxt('AirQualityPrediction/naive_train.csv', delimiter=',') # group data by chunks train_chunks = to_chunks(train) # pick one chunk rows = train_chunks[0] # prepare sequence of hours for the chunk hours = variable_to_series(rows, 2) # interpolate hours interpolate_hours(hours) # plot variables plot_variables(rows, hours)

Running the example creates a figure with a lot of plots for the target variables in the first chunk of the training dataset.

You may need to increase the size of the plot window to better see the details of each plot.

We can see on the left that most ACF plots show significant correlations (dots above the significance region) at lags 1-2 steps, maybe lags 1-3 steps in some cases, with a slow, steady decrease over the lags

Similarly, on the right, we can see significant lags in the PACF plot at 1-2 time steps with steep fall-off.

This strongly suggests an autocorrelation process with an order of perhaps 1, 2, or 3, e.g. AR(3).

In the ACF plots on the left we can also see a daily cycle in the correlations. This may suggest some benefit in a seasonal differencing of the data prior to modeling or the use of an AR model capable of seasonal differencing.

We can repeat this analysis of the target variables for other chunks and we see much the same picture.

It suggests we may be able to get away with a general AR model configuration for all series across all chunks.

## Develop an Autoregressive Model

In this section, we will develop an autoregressive model for the imputed target series data.

The first step is to implement a general function for making a forecast for each chunk.

The function tasks the training dataset and the input columns (chunk id, position in chunk, and hour) for the test set and returns forecasts for all chunks with the expected 3D format of *[chunk][variable][time]*.

The function enumerates the chunks in the forecast, then enumerates the 39 target columns, calling another new function named *forecast_variable()* in order to make a prediction for each lead time for a given target variable.

The complete function is listed below.

# forecast for each chunk, returns [chunk][variable][time] def forecast_chunks(train_chunks, test_input): lead_times = get_lead_times() predictions = list() # enumerate chunks to forecast for i in range(len(train_chunks)): # prepare sequence of hours for the chunk hours = variable_to_series(train_chunks[i], 2) # interpolate hours interpolate_hours(hours) # enumerate targets for chunk chunk_predictions = list() for j in range(39): yhat = forecast_variable(hours, train_chunks[i], test_input[i], lead_times, j) chunk_predictions.append(yhat) chunk_predictions = array(chunk_predictions) predictions.append(chunk_predictions) return array(predictions)

We can now implement a version of the *forecast_variable()*.

For each variable, we first check if there is no data (e.g. all NaNs) and if so, we return a forecast that is a NaN for each forecast lead time.

We then create a series from the variable using the *variable_to_series()* and then impute the missing values using the median within the series by calling *impute_missing()*, both of which were developed in the previous section.

Finally, we call a new function named *fit_and_forecast()* that fits a model and predicts the 10 forecast lead times.

# forecast all lead times for one variable def forecast_variable(hours, chunk_train, chunk_test, lead_times, target_ix): # convert target number into column number col_ix = 3 + target_ix # check for no data if not has_data(chunk_train[:, col_ix]): forecast = [nan for _ in range(len(lead_times))] return forecast # get series series = variable_to_series(chunk_train, col_ix) # impute imputed = impute_missing(chunk_train, hours, series, col_ix) # fit AR model and forecast forecast = fit_and_forecast(imputed) return forecast

We will fit an AR model to a given imputed series. To do this, we will use the statsmodels ARIMA class. We will use ARIMA instead of AR to offer some flexibility if you would like to explore any of the family of ARIMA models.

First, we must define the model, including the order of the autoregressive process, such as AR(1).

# define the model model = ARIMA(series, order=(1,0,0))

Next, the model is fit on the imputed series. We turn off the verbose information during the fit by setting *disp* to *False*.

# fit the model model_fit = model.fit(disp=False)

The fit model is then used to forecast the next 72 hours beyond the end of the series.

# forecast 72 hours yhat = model_fit.predict(len(series), len(series)+72)

We are only interested in specific lead times, so we prepare an array of those lead times, subtract 1 to turn them into array indices, then use them to select the values at the 10 forecast lead times in which we are interested.

# extract lead times lead_times = array(get_lead_times()) indices = lead_times - 1 return yhat[indices]

The statsmodels ARIMA models use linear algebra libraries to fit the model under the covers, and sometimes the fit process can be unstable on some data. As such, it can throw an exception or report a lot of warnings.

We will trap exceptions and return a *NaN* forecast, and ignore all warnings during the fit and evaluation.

The *fit_and_forecast()* function below ties all of this together.

# fit AR model and generate a forecast def fit_and_forecast(series): # define the model model = ARIMA(series, order=(1,0,0)) # return a nan forecast in case of exception try: # ignore statsmodels warnings with catch_warnings(): filterwarnings("ignore") # fit the model model_fit = model.fit(disp=False) # forecast 72 hours yhat = model_fit.predict(len(series), len(series)+72) # extract lead times lead_times = array(get_lead_times()) indices = lead_times - 1 return yhat[indices] except: return [nan for _ in range(len(get_lead_times()))]

We are now ready to evaluate an autoregressive process for each of the 39 series in each of the 207 training chunks.

We will start off by testing an AR(1) process.

The complete code example is listed below.

# autoregression forecast from numpy import loadtxt from numpy import nan from numpy import isnan from numpy import count_nonzero from numpy import unique from numpy import array from numpy import nanmedian from statsmodels.tsa.arima_model import ARIMA from matplotlib import pyplot from warnings import catch_warnings from warnings import filterwarnings # split the dataset by 'chunkID', return a list of chunks def to_chunks(values, chunk_ix=0): chunks = list() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks.append(values[selection, :]) return chunks # return a list of relative forecast lead times def get_lead_times(): return [1, 2, 3, 4, 5, 10, 17, 24, 48, 72] # interpolate series of hours (in place) in 24 hour time def interpolate_hours(hours): # find the first hour ix = -1 for i in range(len(hours)): if not isnan(hours[i]): ix = i break # fill-forward hour = hours[ix] for i in range(ix+1, len(hours)): # increment hour hour += 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # fill-backward hour = hours[ix] for i in range(ix-1, -1, -1): # decrement hour hour -= 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # return true if the array has any non-nan values def has_data(data): return count_nonzero(isnan(data)) < len(data) # impute missing data def impute_missing(rows, hours, series, col_ix): # impute missing using the median value for hour in the series imputed = list() for i in range(len(series)): if isnan(series[i]): # get all rows with the same hour matches = rows[rows[:,2]==hours[i]] # fill with median value value = nanmedian(matches[:, col_ix]) if isnan(value): value = 0.0 imputed.append(value) else: imputed.append(series[i]) return imputed # layout a variable with breaks in the data for missing positions def variable_to_series(chunk_train, col_ix, n_steps=5*24): # lay out whole series data = [nan for _ in range(n_steps)] # mark all available data for i in range(len(chunk_train)): # get position in chunk position = int(chunk_train[i, 1] - 1) # store data data[position] = chunk_train[i, col_ix] return data # fit AR model and generate a forecast def fit_and_forecast(series): # define the model model = ARIMA(series, order=(1,0,0)) # return a nan forecast in case of exception try: # ignore statsmodels warnings with catch_warnings(): filterwarnings("ignore") # fit the model model_fit = model.fit(disp=False) # forecast 72 hours yhat = model_fit.predict(len(series), len(series)+72) # extract lead times lead_times = array(get_lead_times()) indices = lead_times - 1 return yhat[indices] except: return [nan for _ in range(len(get_lead_times()))] # forecast all lead times for one variable def forecast_variable(hours, chunk_train, chunk_test, lead_times, target_ix): # convert target number into column number col_ix = 3 + target_ix # check for no data if not has_data(chunk_train[:, col_ix]): forecast = [nan for _ in range(len(lead_times))] return forecast # get series series = variable_to_series(chunk_train, col_ix) # impute imputed = impute_missing(chunk_train, hours, series, col_ix) # fit AR model and forecast forecast = fit_and_forecast(imputed) return forecast # forecast for each chunk, returns [chunk][variable][time] def forecast_chunks(train_chunks, test_input): lead_times = get_lead_times() predictions = list() # enumerate chunks to forecast for i in range(len(train_chunks)): # prepare sequence of hours for the chunk hours = variable_to_series(train_chunks[i], 2) # interpolate hours interpolate_hours(hours) # enumerate targets for chunk chunk_predictions = list() for j in range(39): yhat = forecast_variable(hours, train_chunks[i], test_input[i], lead_times, j) chunk_predictions.append(yhat) chunk_predictions = array(chunk_predictions) predictions.append(chunk_predictions) return array(predictions) # convert the test dataset in chunks to [chunk][variable][time] format def prepare_test_forecasts(test_chunks): predictions = list() # enumerate chunks to forecast for rows in test_chunks: # enumerate targets for chunk chunk_predictions = list() for j in range(3, rows.shape[1]): yhat = rows[:, j] chunk_predictions.append(yhat) chunk_predictions = array(chunk_predictions) predictions.append(chunk_predictions) return array(predictions) # calculate the error between an actual and predicted value def calculate_error(actual, predicted): # give the full actual value if predicted is nan if isnan(predicted): return abs(actual) # calculate abs difference return abs(actual - predicted) # evaluate a forecast in the format [chunk][variable][time] def evaluate_forecasts(predictions, testset): lead_times = get_lead_times() total_mae, times_mae = 0.0, [0.0 for _ in range(len(lead_times))] total_c, times_c = 0, [0 for _ in range(len(lead_times))] # enumerate test chunks for i in range(len(test_chunks)): # convert to forecasts actual = testset[i] predicted = predictions[i] # enumerate target variables for j in range(predicted.shape[0]): # enumerate lead times for k in range(len(lead_times)): # skip if actual in nan if isnan(actual[j, k]): continue # calculate error error = calculate_error(actual[j, k], predicted[j, k]) # update statistics total_mae += error times_mae[k] += error total_c += 1 times_c[k] += 1 # normalize summed absolute errors total_mae /= total_c times_mae = [times_mae[i]/times_c[i] for i in range(len(times_mae))] return total_mae, times_mae # summarize scores def summarize_error(name, total_mae, times_mae): # print summary lead_times = get_lead_times() formatted = ['+%d %.3f' % (lead_times[i], times_mae[i]) for i in range(len(lead_times))] s_scores = ', '.join(formatted) print('%s: [%.3f MAE] %s' % (name, total_mae, s_scores)) # plot summary pyplot.plot([str(x) for x in lead_times], times_mae, marker='.') pyplot.show() # load dataset train = loadtxt('AirQualityPrediction/naive_train.csv', delimiter=',') test = loadtxt('AirQualityPrediction/naive_test.csv', delimiter=',') # group data by chunks train_chunks = to_chunks(train) test_chunks = to_chunks(test) # forecast test_input = [rows[:, :3] for rows in test_chunks] forecast = forecast_chunks(train_chunks, test_input) # evaluate forecast actual = prepare_test_forecasts(test_chunks) total_mae, times_mae = evaluate_forecasts(forecast, actual) # summarize forecast summarize_error('AR', total_mae, times_mae)

Running the example first reports the overall MAE for the test set, followed by the MAE for each forecast lead time.

We can see that the model achieves a MAE of about 0.492, which is less than a MAE 0.520 achieved by a naive persistence model. This shows that indeed the approach has some skill.

AR: [0.492 MAE] +1 0.225, +2 0.342, +3 0.410, +4 0.475, +5 0.512, +10 0.593, +17 0.586, +24 0.588, +48 0.588, +72 0.604

A line plot of MAE per forecast lead time is created, showing the linear increase in forecast error with the increase in forecast lead time.

We can change the code to test other AR models. Specifically the order of the ARIMA model in the *fit_and_forecast()* function.

An AR(2) model can be defined as:

model = ARIMA(series, order=(2,0,0))

Running the code with this update shows a further drop in error to an overall MAE of about 0.490.

AR: [0.490 MAE] +1 0.229, +2 0.342, +3 0.412, +4 0.470, +5 0.503, +10 0.563, +17 0.576, +24 0.605, +48 0.597, +72 0.608

We can also try an AR(3):

model = ARIMA(series, order=(3,0,0))

Re-running the example with the update shows an increase in the overall MAE compared to an AR(2).

An AR(2) might be a good global level configuration to use, although it is expected that models tailored to each variable or each series may perform better overall.

AR: [0.491 MAE] +1 0.232, +2 0.345, +3 0.412, +4 0.472, +5 0.504, +10 0.556, +17 0.575, +24 0.607, +48 0.599, +72 0.611

## Autoregressive Model with Global Impute Strategy

We can evaluate the AR(2) model with an alternate imputation strategy.

Instead of calculating the median value for the same hour across the series in the chunk, we can calculate the same value across the variable in all chunks.

We can update the *impute_missing()* to take all training chunks as an argument, then collect rows from all chunks for a given hour in order to calculate the median value used to impute. The updated version of the function is listed below.

# impute missing data def impute_missing(train_chunks, rows, hours, series, col_ix): # impute missing using the median value for hour in all series imputed = list() for i in range(len(series)): if isnan(series[i]): # collect all rows across all chunks for the hour all_rows = list() for rows in train_chunks: [all_rows.append(row) for row in rows[rows[:,2]==hours[i]]] # calculate the central tendency for target all_rows = array(all_rows) # fill with median value value = nanmedian(all_rows[:, col_ix]) if isnan(value): value = 0.0 imputed.append(value) else: imputed.append(series[i]) return imputed

In order to pass the train_chunks to the *impute_missing()* function, we must update the *forecast_variable()* function to also take *train_chunks* as an argument and pass it along, and in turn update the *forecast_chunks()* function to pass *train_chunks*.

The complete example using a global imputation strategy is listed below.

# autoregression forecast with global impute strategy from numpy import loadtxt from numpy import nan from numpy import isnan from numpy import count_nonzero from numpy import unique from numpy import array from numpy import nanmedian from statsmodels.tsa.arima_model import ARIMA from matplotlib import pyplot from warnings import catch_warnings from warnings import filterwarnings # split the dataset by 'chunkID', return a list of chunks def to_chunks(values, chunk_ix=0): chunks = list() # get the unique chunk ids chunk_ids = unique(values[:, chunk_ix]) # group rows by chunk id for chunk_id in chunk_ids: selection = values[:, chunk_ix] == chunk_id chunks.append(values[selection, :]) return chunks # return a list of relative forecast lead times def get_lead_times(): return [1, 2, 3, 4, 5, 10, 17, 24, 48, 72] # interpolate series of hours (in place) in 24 hour time def interpolate_hours(hours): # find the first hour ix = -1 for i in range(len(hours)): if not isnan(hours[i]): ix = i break # fill-forward hour = hours[ix] for i in range(ix+1, len(hours)): # increment hour hour += 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # fill-backward hour = hours[ix] for i in range(ix-1, -1, -1): # decrement hour hour -= 1 # check for a fill if isnan(hours[i]): hours[i] = hour % 24 # return true if the array has any non-nan values def has_data(data): return count_nonzero(isnan(data)) < len(data) # impute missing data def impute_missing(train_chunks, rows, hours, series, col_ix): # impute missing using the median value for hour in all series imputed = list() for i in range(len(series)): if isnan(series[i]): # collect all rows across all chunks for the hour all_rows = list() for rows in train_chunks: [all_rows.append(row) for row in rows[rows[:,2]==hours[i]]] # calculate the central tendency for target all_rows = array(all_rows) # fill with median value value = nanmedian(all_rows[:, col_ix]) if isnan(value): value = 0.0 imputed.append(value) else: imputed.append(series[i]) return imputed # layout a variable with breaks in the data for missing positions def variable_to_series(chunk_train, col_ix, n_steps=5*24): # lay out whole series data = [nan for _ in range(n_steps)] # mark all available data for i in range(len(chunk_train)): # get position in chunk position = int(chunk_train[i, 1] - 1) # store data data[position] = chunk_train[i, col_ix] return data # fit AR model and generate a forecast def fit_and_forecast(series): # define the model model = ARIMA(series, order=(2,0,0)) # return a nan forecast in case of exception try: # ignore statsmodels warnings with catch_warnings(): filterwarnings("ignore") # fit the model model_fit = model.fit(disp=False) # forecast 72 hours yhat = model_fit.predict(len(series), len(series)+72) # extract lead times lead_times = array(get_lead_times()) indices = lead_times - 1 return yhat[indices] except: return [nan for _ in range(len(get_lead_times()))] # forecast all lead times for one variable def forecast_variable(hours, train_chunks, chunk_train, chunk_test, lead_times, target_ix): # convert target number into column number col_ix = 3 + target_ix # check for no data if not has_data(chunk_train[:, col_ix]): forecast = [nan for _ in range(len(lead_times))] return forecast # get series series = variable_to_series(chunk_train, col_ix) # impute imputed = impute_missing(train_chunks, chunk_train, hours, series, col_ix) # fit AR model and forecast forecast = fit_and_forecast(imputed) return forecast # forecast for each chunk, returns [chunk][variable][time] def forecast_chunks(train_chunks, test_input): lead_times = get_lead_times() predictions = list() # enumerate chunks to forecast for i in range(len(train_chunks)): # prepare sequence of hours for the chunk hours = variable_to_series(train_chunks[i], 2) # interpolate hours interpolate_hours(hours) # enumerate targets for chunk chunk_predictions = list() for j in range(39): yhat = forecast_variable(hours, train_chunks, train_chunks[i], test_input[i], lead_times, j) chunk_predictions.append(yhat) chunk_predictions = array(chunk_predictions) predictions.append(chunk_predictions) return array(predictions) # convert the test dataset in chunks to [chunk][variable][time] format def prepare_test_forecasts(test_chunks): predictions = list() # enumerate chunks to forecast for rows in test_chunks: # enumerate targets for chunk chunk_predictions = list() for j in range(3, rows.shape[1]): yhat = rows[:, j] chunk_predictions.append(yhat) chunk_predictions = array(chunk_predictions) predictions.append(chunk_predictions) return array(predictions) # calculate the error between an actual and predicted value def calculate_error(actual, predicted): # give the full actual value if predicted is nan if isnan(predicted): return abs(actual) # calculate abs difference return abs(actual - predicted) # evaluate a forecast in the format [chunk][variable][time] def evaluate_forecasts(predictions, testset): lead_times = get_lead_times() total_mae, times_mae = 0.0, [0.0 for _ in range(len(lead_times))] total_c, times_c = 0, [0 for _ in range(len(lead_times))] # enumerate test chunks for i in range(len(test_chunks)): # convert to forecasts actual = testset[i] predicted = predictions[i] # enumerate target variables for j in range(predicted.shape[0]): # enumerate lead times for k in range(len(lead_times)): # skip if actual in nan if isnan(actual[j, k]): continue # calculate error error = calculate_error(actual[j, k], predicted[j, k]) # update statistics total_mae += error times_mae[k] += error total_c += 1 times_c[k] += 1 # normalize summed absolute errors total_mae /= total_c times_mae = [times_mae[i]/times_c[i] for i in range(len(times_mae))] return total_mae, times_mae # summarize scores def summarize_error(name, total_mae, times_mae): # print summary lead_times = get_lead_times() formatted = ['+%d %.3f' % (lead_times[i], times_mae[i]) for i in range(len(lead_times))] s_scores = ', '.join(formatted) print('%s: [%.3f MAE] %s' % (name, total_mae, s_scores)) # plot summary pyplot.plot([str(x) for x in lead_times], times_mae, marker='.') pyplot.show() # load dataset train = loadtxt('AirQualityPrediction/naive_train.csv', delimiter=',') test = loadtxt('AirQualityPrediction/naive_test.csv', delimiter=',') # group data by chunks train_chunks = to_chunks(train) test_chunks = to_chunks(test) # forecast test_input = [rows[:, :3] for rows in test_chunks] forecast = forecast_chunks(train_chunks, test_input) # evaluate forecast actual = prepare_test_forecasts(test_chunks) total_mae, times_mae = evaluate_forecasts(forecast, actual) # summarize forecast summarize_error('AR', total_mae, times_mae)

Running the example shows a further drop in the overall MAE to about 0.487.

It may be interesting to explore imputation strategies that alternate the method used to fill in missing values based on how much missing data a series has or the gap being filled.

AR: [0.487 MAE] +1 0.228, +2 0.339, +3 0.409, +4 0.469, +5 0.499, +10 0.560, +17 0.573, +24 0.600, +48 0.595, +72 0.606

A line plot of MAE vs. forecast lead time is also created.

## Extensions

This section lists some ideas for extending the tutorial that you may wish to explore.

**Imputation Strategies**. Develop and evaluate one additional alternate imputation strategy for the missing data in each series.**Data Preparation**. Explore whether data preparation techniques applied to each can improve model skill, such as standardization, normalization, and power transforms.**Differencing**. Explore whether differencing, such as 1-step or 24-step (seasonal differencing), can make each series stationary, and in turn result in better forecasts.

If you explore any of these extensions, I’d love to know.

## Further Reading

This section provides more resources on the topic if you are looking to go deeper.

### Posts

- A Standard Multivariate, Multi-Step, and Multi-Site Time Series Forecasting Problem
- A Gentle Introduction to Autocorrelation and Partial Autocorrelation
- How to Grid Search ARIMA Model Hyperparameters with Python

### API

- statsmodels.graphics.tsaplots.plot_acf API
- statsmodels.graphics.tsaplots.plot_pacf API
- statsmodels.tsa.arima_model.ARIMA API

### Articles

- EMC Data Science Global Hackathon (Air Quality Prediction)
- Chucking everything into a Random Forest: Ben Hamner on Winning The Air Quality Prediction Hackathon
- Winning Code for the EMC Data Science Global Hackathon (Air Quality Prediction)
- General approaches to partitioning the models?

## Summary

In this tutorial, you discovered how to develop autoregressive models for multi-step time series forecasting for a multivariate air pollution time series.

Specifically, you learned:

- How to analyze and impute missing values for time series data.
- How to develop and evaluate an autoregressive model for multi-step time series forecasting.
- How to improve an autoregressive model using alternate data imputation methods.

Do you have any questions?

Ask your questions in the comments below and I will do my best to answer.

The post How to Develop Autoregressive Forecasting Models for Multi-Step Air Pollution Time Series Forecasting appeared first on Machine Learning Mastery.